Equipment purchase

$1090
Buy

Antminer L3

The BM1485 ASIC chip

Finally an ASIC chip to mine Scrypt coins
The BM1485 chip, the first Litecoin Application Specific Integrated Circuit (ASIC) chip in more than two years, is designed by the same team that designs the world’s most power-efficient ASIC chips for Bitcoin mining.
Each Antminer L3+ employs 288 such chips to deliver more hashrate and efficiency than any previous Litecoin miner on the market.

A Compact Time-tested Design
World’s most powerful Litecoin miner, yet smaller than many portable boom-boxes
The Antminer L3+ follows a form factor similar to that of the hugely popular Antminer S9 and is nearly the same size.
Whether in a home or in a mining farm with several other L3+ miners, the Antminer L3+’s small footprint fits well in all locations.

Controlled by Texas Instruments’ 1GHz ARM® Cortex-A8 Microprocessor
L3+’s control board uses Texas Instruments’ AM335x 1GHz ARM® Cortex-A8 microprocessor
The Antminer L3+’s control board employs the fast AM335x 1GHz ARM® Cortex-A8 microprocessor and supports Gigabit Ethernet to ensure that mined blocks are submitted instantly.

Engineered to Remain Powerful yet Cool
A high-grade aluminum case, customized heat-sinks and two computer-controlled fans to keep it cool
The L3+ utilizes a combination of conduction and convection cooling to make the world’s most powerful Litecoin miner perform at its best while creating no more heat than the latest terahash Bitcoin miner.
Every chip of the L3+ is fitted with custom-made heat sinks that are made of a high-grade Aluminum alloy. The case of the L3+ is made of the same material. Two computer-controlled high speed fans on both ends of the “tube” ensure that the hot air is rapidly replaced by cooler air at the required pace.

Ease of use
Antminer’s user interface has been carefully designed keeping the needs of our users in mind
After you have accessed the Antminer’s user interface, all you need to do is to enter your wallet address and mining pool settings to start mining. The user interface also allows you to customize certain settings and to upgrade to new firmware releases from Bitmain.

$1050
Buy

Antminer T9

The BM1387 ASIC chip

The world’s first bitcoin mining ASIC based on 
the 16nm process node
Bitmain’s BM1387 chip is built using TSMC’s 16nm FinFET technology and is the world’s most efficient bitcoin mining chip in the consumer market.
Each Antminer T9+ employs 162 such chips to deliver a stability and efficiency combination not found in any other Bitcoin miner in existence.


A Compact 
Time-tested Design
World’s most powerful bitcoin miner, 
yet smaller than many portable boom-boxes
The Antminer T9+ follows the same form factor as that of the hugely popular Antminer S9 and is also the same size.
Whether in a home or in a mining farm with several other T9+ miners, Antminer T9+’s small footprint makes it comfortable in all locations.


Controlled by a Dual ARM® Cortex®-A9 Microprocessor
T9+’s control board uses a Xilinx® Zynq®-7010 FPGA with a Dual ARM® Cortex®-A9 microprocessor
Bitmain’s engineering team understood the importance of every detail while working to make a highly stable yet efficient Bitcoin miner. The Antminer T9+’s control board employs the fast Dual ARM® Cortex®-A9 microprocessor with CoreSight™ and supports Gigabit Ethernet to ensure that mined blocks are submitted instantly.


Engineered to Remain Powerful Yet Cool
A high-grade aluminium case, customized heat-sinks and two computer-controlled fans to keep it cool
The T9+ utilizes a combination of conduction and convection cooling to make the world’s most powerful miner perform best without getting hotter than any other terahash bitcoin miner.
Every chip of the T9+ is fitted with custom-made heat sinks that are made of a high-grade aluminum alloy. The case of the T9+ is made of the same material. Two computer-controlled high-speed fans on both ends of the “tube” ensure that the hot air is rapidly replaced by cooler air at the required pace.


Ease of Use
Antminer T9+’s user interface has been carefully designed keeping in mind the needs of its users
After you have accessed the Antminer’s user interface, all you have to do is to enter your wallet address and mining pool settings before you start mining. The user interface also allows you to customize settings and can be upgraded to new releases from Bitmain.

$1710
Buy

Antminer S9

The BM1387 ASIC Chip

The world’s first bitcoin mining ASIC based on the 16nm process node
Bitmain’s BM1387 chip is built using TSMC’s 16nm FinFET technology and, delivering a record-breaking 0.098 J/GHs, is the world’s most efficient bitcoin mining chip in the consumer market.
Each Antminer S9 employs 189 such chips to deliver more hashrate and efficiency than any bitcoin miner ever made.


A Compact Time-tested Design
World’s most powerful bitcoin miner, yet smaller than many portable boom-boxes
The Antminer S9 follows the same form factor as that of the hugely popular Antminer S7 and is nearly the same size. Yet it has more than thrice the power and twice the efficiency of the S7.


Controlled by a Dual ARM® Cortex®-A9 Microprocessor
S9’s control board uses a Xilinx® Zynq®-7000 series FPGA with a Dual ARM® Cortex®-A9 microprocessor
Bitmain’s engineering team understood the importance of every detail while working to make the world's most power-efficient yet powerful Bitcoin miner. The Antminer S9’s control board employs the fast Dual ARM® Cortex®-A9 microprocessor with CoreSight™ and supports Gigabit Ethernet to ensure that mined blocks are submitted instantly.


Engineered to Remain Powerful Yet Cool
A high-grade aluminium case, customized heat-sinks and two computer-controlled fans to keep it cool
The S9 utilizes a combination of conduction and convection cooling to make the world’s most powerful miner perform best without getting hotter than any other terahash bitcoin miner.
Every chip of the S9 is fitted with custom-made heat sinks that are made of a high-grade Aluminium alloy. The case of the S9 is made of the same material. Two computer-controlled high speed fans on both ends of the “tube” ensure that the hot air is rapidly replaced by cooler air at the required pace.


Ease of Use
Antminer’s user interface has been carefully designed keeping in mind the needs of our users
After you have accessed the Antminer’s user interface, all you have to do is to enter your wallet address and mining pool settings before you start mining. The user interface also allows you to customize settings and can be upgraded to new releases from Bitmain.

$2130
Buy

INNOSILICON A4 + LTCMaster

Surpassing its predecessor by a big margin, A4+ reaches a spectacular 620Mhs (+- 8%), with 750W (+- 8% @25?) at the wall, offer its customers best mining competitive advantage, significantly lower operating cost, higher ROI and longevity. It has a small form factor, low noise, better quality and more reliable, designed to win and possess best ever resell values.


Shipping&Packaging
1. Packing list one barrel type tubes, one controller, and cable (without power supply).
2. Delivery time first pay, first served. Goods will be sent within one week after payment confirmation.
3. If you have ordered the PSU, then please be aware the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU you reserved does not contain 220V(110V) AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.
4. If you wish to order PSU with more than 1600W power, please purchase AC cable with 31.0 specifications, and 3 wire cores with diameter more than 1.0mm.
5. Please write the recipient’s name, contact information and address carefully. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.
6. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.
7. In order to increase the in transit security of the high-value miner, we are implementing insurance fees with the shipping fees, starting from December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.
8. The actual purchase price will be the default value of commercial invoice(CI), and the shipping list in CI only includes the products you actually purchased. If there is any special need, please note in the CI Note column.


Warranty
Miner sales is different from the general consumer electronics products, which are specially customized according to customers’ needs. Please notice before purchase. The after-sales service policy is as follows. After payment, the product cannot be returned or refund.
180 days parts warranty (starts once the miner gets received). If any problem, please leave a Ticket Type C1 message on our message board. Our technical support team will get in touch with you asap.
Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsiblility of the customer.
The price of miners may be adjusted at any time without prior notice or price compensation to customer.


The warranty expires in the following cases:
Miner itself is demolished, privately altered or component replacement;
Lightning, voltage surges, poor quality power supply causes damage;
Circuit boards and components are filled with water, exposed to moisture or corroded;
The circuit board or the chip is burned;
Over clocking.
If this happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

$3510
Buy

INNOSILICON A6 LTCMaster

As the world first GH LTC miner, A6 reaches a spectacular 1.23Gh/s (+/- 8%), with 1500W (+/- 8% @25?) at the wall, offer its customers best mining competitive advantage, significantly lower operating cost, higher ROI and longevity. It has a small form factor, low noise, better quality and more reliable, designed to win and possess best ever resell values


Shipping&Packaging
1. Packing list: Two barrel type tubes, one controller, and cable (without power supply).
2. Delivery time: first pay, first served. Goods will be sent within one week after payment confirmation.
3. If you have ordered the PSU, then please be aware: the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU you reserved does not contain 220V(110V) AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.
4. If you wish to order PSU with more than 1600W power, please purchase AC cable with 3*1.0 specifications, and 3 wire cores with diameter more than 1.0mm.
5. Please write the recipient ’s name, contact information and address carefully. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.
6. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.
7. In order to increase the in transit security of the high-value miner, we are implementing insurance fees with the shipping fees, starting from December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.
8. The actual purchase price will be the default value of commercial invoice(CI), and the shipping list in CI only includes the products you actually purchased. If there is any special need, please note in the CI Note column.
Please note that all sales are final, your order will be guaranteed delivery within 30 days.


Warranty
Miner sales is different from the general consumer electronics products, which are specially customized according to customers’ needs. Please notice before purchase. The after-sales service policy is as follows. After payment, the product cannot be returned or refund.
180 days parts warranty (starts once the miner gets received). If any problem, please leave a Ticket Type: Our technical support team will get in touch with you asap.
Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsiblility of the customer.
The price of miners may be adjusted at any time without prior notice or price compensation to customer.


The warranty expires in the following cases:
Miner itself is demolished, privately altered or component replacement;
Lightning, voltage surges, poor quality power supply causes damage;
Circuit boards and components are filled with water, exposed to moisture or corroded;
The circuit board or the chip is burned;
Over clocking.
If this happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

$3090
Buy

INNOSILICON A8 + CryptoMaster

The A8+ CryptoMaster will lead the future market with unbeatable price and performance. 248KH/s is pretty ahead of other miners on this algorithm. Besides, the A8+ owns huge competitive advantage, such as low power consumption, high power efficiency, compact time-tested design and so on. As a result, A8+ can significantly reduce the operating cost and bring higher ROI.


Shipping&Packaging
1. Delivery time: first pay, first served. Goods will be sent within one week after payment confirmation.
2. If you have ordered the PSU, then please be aware: the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU you reserved does not contain 220V(110V) AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.
3. If you wish to order PSU with more than 1600W power, please purchase AC cable with 3*1.0 specifications, and 3 wire cores with diameter more than 1.0mm.
4. Please write the recipient's name, contact information and address carefully. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.
5. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.
6. In order to increase the in transit security of the high-value miner, we are implementing insurance fees with the shipping fees, starting from December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.


Warranty
All A8+ CryptoMaster will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.
180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival). If any problem, please leave a Ticket Type: C1 message on our message board. Our technical support team will get in touch with you asap.
Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.
The price of miners may be adjusted at any time without prior notice or price compensation to customers.


The warranty expires in the following cases:
Miner is demolished, privately altered or component replacement by customers;
Lightning, voltage surges, poor quality power supply causing damage;
Circuit boards and components damaged by water, exposed to moisture or corroded;
The circuit board or the chip is completely burned;
Excessive Over-clocking in a overheating environment.
If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

$405
Buy

AntRouter R1-LTC

The BM1485 ASIC chip

Finally an ASIC chip to mine Scrypt coins
The BM1485 chip, the first Litecoin Application Specific Integrated Circuit (ASIC) chip in more than two years, is designed by the same team that designs the world’s most power-efficient ASIC chips for Bitcoin mining.

Pocket-size portable design

Surf the internet or mine from anywhere anytime!
The small and sturdy build of the R1-LTC makes it easy to carry in your pocket and set up wireless internet access wherever internet is available.

Overview Specification Gallery Coming soon
R1-LTC
The WiFi router that mines Litecoin
The BM1485 ASIC chip
Finally an ASIC chip to mine Scrypt coins
The BM1485 chip, the first Litecoin Application Specific Integrated Circuit (ASIC) chip in more than two years, is designed by the same team that designs the world’s most power-efficient ASIC chips for Bitcoin mining.

Pocket-size portable design
Surf the internet or mine from anywhere anytime!
The small and sturdy build of the R1-LTC makes it easy to carry in your pocket and set up wireless internet access wherever internet is available.

Litecoin miner and lottery
A WiFi router that mines a small yet steady stream of Litecoins
The R1-LTC’s power consumption is comparable to that of an average WiFi router yet, just by staying powered on like your existing WiFi router, it brings you a chance every 2.5 minutes to win 25 Litecoins!

Even if you don’t win the jackpot, you still continue to get a small steady stream of coins based on the network difficulty of the Scrypt coin being mined.

2.4G wireless router
Supports the 2.4G WiFi standard and a WiFi speed up to 150Mbps
R1-LTC is also a 2.4G wireless router that supports PPPoE, WEP/WPA/WPA2 encryption and a WiFi transmission rate of up to 150Mbps.

Enhanced user experience
Employs the open-source OpenWrt firmware
The user interface of the R1-LTC uses a web version of the open-source and powerful OpenWrt firmware to deliver a fast and smooth user experience.

Portable device charger
Built-in USB port to charge various devices
The built-in USB port of the AntRouter R1-LTC makes it more useful as you can charge your phone or other digital devices while the AntRouter continues its normal function as a WiFi router and a Scrypt coin miner.

Many Scrypt coins, any pool
Tested for Litecoin but ready to mine other Scrypt coins
Although the R1-LTC has only been tested to mine Litecoin, it can theoretically mine any Scrypt coin! Furthermore, you can mine on any mining pool you choose, a significant enhancement over the earlier AntRouter R1.

The best way to predict the future is to invent it.